Why Are There So Many Kinds of CPT Rigs?

As you look through our website, you'll see that there are a number of different types of CPT Rigs. As you can imagine, they each have their purpose, or 'application'. In order to understand why different types of CPT Rigs exist, it's helpful to remember how CPT works in the first place. Cone Penetration Testing The goal of Cone Penetration Testing is to drive a hardened cone vertically into the the ground and to keep it moving at a specific rate of progress. The force that it takes to maintain the cone moving downward at a defined rate is an indicator of how hard the soil is at a given depth. The friction the cone sleeve encounters along the way gives us an indication of the make up of the soil. Deciding Between CPT Rigs As you can imagine, as the cone progresses further downward and encounters different types of soils, sands, clays and rocks it can take a substantial amount of pressure to keep it moving! One of the first factors that influences the design of CPT Rigs is the maximum amount of pressure that will be required to perform a specific test, to a specific depth in a given geological area. As much as 20 tons of downward force may be required to perform a broad enough range of tests to make a given rig viable for a market. For every ton of downward pressure on the test cone through the rod system, you have to have a reaction force equal to this to keep the Rig from lifting up. This means that either the Rig has to be heavier than the maximum push force, plus a safety margin, or it needs to be anchored down in some way as to reliably resist the upward force generated by [...]

The Importance of Proper Soil Quality

Sometimes it's hard to imagine how important designing the proper foundation support for a structure can be. The public may assume that the ground we are standing on is pretty much stable and should be able to hold whatever we build on it, without consideration of soil quality. However, there are examples throughout history of structures that were built upon soil conditions that were not suitable for their weight. Perhaps the most famous is the Leaning Tower of Pisa. With better soil quality, it may have been known today as the Tower of Pisa Unfortunately for the constructors, the Tower was built upon a patch of soil that was too soft on one side for the pressure the structure would exert as it's height climbed. The Tower actually had begun leaning during the construction process and had quite a tilt before it was even completed. Over time, builders began to realize that in order to build magnificent structures, and to have them endure over time, they had to understand the geology they were building on. They had to be able to translate an understanding of the soil quality that is not able to be seen into foundation designs that would support even the tallest skyscrapers we build today. Through lots of experimentation, science, engineering and creative solutions, we've been able to evolve our understanding of how to perform a variety of soil tests and how to link that to solid design and construction methods that will support structures as varied as highway bridges and high-rise buildings. As you explore the resources that we've provided in our CPT University, you'll learn about a variety of soil tests and the advantages of each. Tests such as Standard Penetration Tests (SPT), Cone Penetration Tests (CPT) and other forms of testing all have their [...]

Standard Penetration Test (SPT) a Basic Soil Testing Procedure

A widely used soil testing procedure is the Standard Penetration Test (SPT). This test is still used because of it's simplicity and low cost. It can provide useful information in very specific types of soil conditions, but is not as accurate as a Cone Penetration Test. Here's more information about this basic soil testing procedure. For this test, a sample tube, which is thick walled to endure the test environment is placed at the bottom of a borehole. A heavy slide hammer (140 lbs) is dropped repeatedly 30 inches onto the top of the sample tube, driving it into the soil being tested. The operation entails the operator counting the number of hammer strikes it takes to drive the sample tube 6 inches at a time. Each test drives the sample tube up to 18 inches deep. It is then extracted and if desired a sample of the soil is pulled from the tube. The borehole is drilled deeper and the test is repeated. Often soil recovery is poor and counting errors per interval may occur. The number of hammer strikes it takes for the tube to penetrate the second and third 6 inch depth is called the 'standard penetration resistance', or otherwise called the 'N-value'. The standard penetration resistance offers a gauge of the soil density of soils which are hard to pull up with simply a borehole sampling approach. You can imagine pushing a sample tube into gravel, sand or silt and struggling to recover samples that are useful for analysis. Coupling the standard penetration test with borehole drilling and sampling can be an improvement for understanding certain soil types underground. This basic soil testing procedure gives reasonably consistent results in fine-grained sands and is not as consistent in coarse sands or clays. It can be useful in [...]

Soil Electrical Conductivity

In terms of measuring soil contamination, measuring soil electrical conductivity can provide useful information for a more complete site characterization study. Measuring sub-surface soil electrical conductivity is becoming less expensive as well as faster and easier. This form of measurement has most commonly been used for measuring physical and chemical soil properties but the ability to pinpoint contaminants is improving, particularly with software designed for the job. How to Measure Soil Conductivity Measuring soil electrical conductivity is facilitated by two different types of sensors, a contact sensor and a non-contact sensor. Contact sensors work by making contact with soil to measure electrical conductivity directly. These types of instruments are most often used along the surface of a field to characterize the soil for agricultural purposes. Non-Contact Sensors Non-contact sensors, as the name implies, function without having to touch the soil directly. This method is based on the measurement of the change in mutual impedance between a pair of coils passed through the soil. Electricity is applied through the coils, which creates a magnetic field. Much like the way an induction motor operates, this magnetic field induces an electrical current in nearby materials that are magnetic. You can assess the level of current induced by measuring the impedance in the operating coils. Passing non-contact sensors down a borehole has been used effectively to establish geophysical properties such as the presence of clay (which may have highly conductive materials distributed through it) and water table levels. In cases where an area is known to have contamination, the identification of clay layers and groundwater distribution can help to estimate where 'plumes' of contamination might be contained orspread underground. In the case of a borehole test, water samples can be gathered directly from discrete depths to confirm the presence of various types of contaminants. [...]

LED Fluorescence Detectors and Fuel Fluorescence Detection (FFD)

Hydrocarbons: including gasoline, kerosene, diesel fuel, jet fuel, lubricating and hydraulic oils, and tars and asphalts contain Polycyclic Aromatic Hydrocarbons (PAH’s). Polycyclic Aromatic Hydrocarbons (PAH’s) distributed in soils and groundwater fluoresce when irradiated by ultraviolet light. Because different types of PAHs fluoresce at different wavelengths, each has its own fluorescence signature. Using an instrument that measures the intensity and wavelength of the fluoresced hydrocarbon enables the assessment of the hydrocarbons present. This makes UV Fluorescence a useful technology to use in characterizing surface, subsurface and groundwater hydrocarbon contamination. We call this Fuel Fluorescence Detection (FFD). What's the right fluorescence detector for you? Using handheld UV lights enables site technicians to establish the nature and distribution of contamination above ground. For surface spills such as what gathers along a shoreline or for surface based operations such as above ground tanks and pipes, this can be a useful place to start. For underground storage tanks a useful way to begin site characterization is with a subsurface probe. Engineers trying to establish the limits of the ‘plume’ or the depth of the contaminant as it travels underground. Plumes will extend outward, downward and upward depending upon factors such as the flow of groundwater and the confining layers of clay and rock. Leveraging the ability to generate and measure fluorescence underground requires a step up in technology. In the case of CPT, a UV light source is placed in the cone itself. Fiber-optic cables transmit the resulting fluorescence to the surface where the intensity and wavelength can be measured. Because of the efficiency of CPT, large and complex sites can be characterized quickly and efficiently. The data logs are available immediately to influence critical decision-making which can help to manage costs in the long term. For instance monitoring wells may need to be installed [...]

Why Are There So Many Kinds of CPT Rigs?

As you look through our website, you'll see that there are a number of different types of CPT Rigs. As you can imagine, they each have their purpose, or 'application'. In order to understand why different types of CPT Rigs exist, it's helpful to remember how CPT works in the first place. The goal of Cone Penetration Testing is to drive a hardened cone vertically into the the ground and to keep it moving at a specific rate of progress. The force that it takes to maintain the cone moving downward at a defined rate is an indicator of how hard the soil is at a given depth. The friction the cone sleeve encounters along the way gives us an indication of the make up of the soil. As you can imagine, as the cone progresses further downward and encounters different types of soils, sands, clays and rocks it can take a substantial amount of pressure to keep it moving! One of the first factors that influences the design of CPT Rigs is the maximum amount of pressure that will be required to perform a specific test, to a specific depth in a given geological area. As much as 20 tons of downward force may be required to perform a broad enough range of tests to make a given rig viable for a market. For every ton of downward pressure on the test cone through the rod system, you have to have a reaction force equal to this to keep the Rig from lifting up. This means that either the Rig has to be heavier than the maximum push force, plus a safety margin, or it needs to be anchored down in some way as to reliably resist the upward force generated by the test (or 'sounding'). Depending upon the [...]

Soil Quality and Soil Liquefaction

Soil quality typically refers to three characteristics of a soil; the chemical, physical and biological properties. When used as an agricultural term, soil quality is often a measure of the soils ability to produce crops over the long term. However, because the chemical and physical properties of soils are of interest to engineers as well, soil quality is often a term used to describe soil properties of interest to designers, engineers and constructors. The soil quality parameters of most interest are the chemical properties and physical properties. We have featured a closer look into some of the other chemical properties of soils in previous posts, including the ability of soils to conduct electricity, and what this can tell us about types of soil contaminants that might be present. Here, we’re going to delve more deeply into physical soil quality, and one property of certain soils that can be fascinating, but also tragically dangerous. That property is the propensity of certain soil types, under certain conditions to exhibit liquefaction. Liquefaction and Soil Quality Liquefaction, as the name implies, is the term used to describe soil that behaves like a liquid. As you can see from the image above, this can lead to catastrophic outcomes. If the people constructing this building had a better understanding of the impact of soil quality on the stability of the structure, they might have had the opportunity to mitigate the potential damage. So clearly, the susceptibility of a soil to liquefaction is an important indicator of the soil's quality. But what is soil liquefaction? Well, as we noted above, liquefaction is when soil acts like a liquid, but how can this happen? Soil liquefaction most often occurs in loose, sandy soil types where the soil itself is mostly, or completely saturated with water. When this type [...]

See the Vertek CPT Lightweight Portable CPT Push System in Action!

At Vertek CPT we love to develop innovative, yet practical CPT solutions with real ROI. There are many situations where an ultra-mobile, yet reliable CPT push system makes a lot of sense. In areas where it is difficult to get rig-based CPT equipment into place, maybe due to the terrain, soil conditions or distance from the nearest road, a CPT system that can be carried and operated by a small crew makes sense. Maximize Your Soil Testing Service Vertek's 10 Ton Portable Cone Penetrometer Test (CPT) hydraulic load frame is the lightest, smallest, most portable hydraulic CPT unit available. The hydraulic power pack and the hydraulic cylinders are independent and coupled by hydraulic quick-disconnects. The aluminum twin cylinders and power pack weigh only 195 kg (430 lbs) and 160 kg (355 lbs) respectively. Even within this lightweight form-factor, the unit still pushes up to 10 tons, meaning that you can reach the depths necessary for many types of tests. After setting 4 sturdy augers with the included drive unit and hand tools as simple as a tape measure, you are ready to mount the unit and start pushing. You can see how easy transportation, set-up, operation and tear-down are here: [/fusion_youtube]

Attending CPT Symposium 2014 Las Vegas, Nevada

See The Vertek S4 Push System in Person! The 3rd International Symposium on Cone Penetration Testing will be held at the Mandarin Oriental hotel in Las Vegas, Nevada, May 12-14, 2014. The theme of the Symposium is the solution of geotechnical and geo-environmental problems using the Cone Penetration Test (CPT). We'll be at booth #1 and also setup outside with our new S4 Push System which is designed to be attached to a wide variety of equipment. Learn more about our entire line of products and data acquisition systems.

Ensuring That Your CPT Data is Correctly Reported and Interpreted

It is important to understand when interpreting CPT data the physics of how the data is produced. This will lead to a better appreciation of where CPT data should be validated with other types of tests in order to ensure that it is being correctly reported and interpreted. In CPT (Cone Penetration Testing), when the tip of the cone is being advanced, there is pressure exerted on the tip itself. This pressure is created from the resistance to downward force by whatever soil is resisting on the cone tip. However, this pressure is not simply exerted from the ground immediately in front of the tip. Rather, the cone forces the ground immediately in front of it to compress. This compression forces the ground in front of it to 'fail' that is, the soil cohesion is not sufficient to resist the tip load, and the soil compresses further down or moves out of the way down, sideways or a little bit away from the cone itself, upwards. Because of this movement and compression, the pressure exerted back on the cone tip is generated from a large area of soil below, around and a bit behind the cone tip itself. This means depending on soil stratification that the instruments in the tip sense soil resistance from around 5 or more cone diameters ahead and around the tip of the cone. Using a cone of 1.5 inches in diameter means that you are actually taking an average cone resistance measurement. This is sometimes called a 'tip influence zone'. If you are pushing through a sub-surface feature, such as a landslide slip face or a layer of softer clay that is a foot or less, it is quite possible to miss this feature entirely. In engineering speak, you might read something like 'exercise caution [...]

Go to Top